Joywayus Hose Barb Reducer,1/4″ to 3/8″ Barb Fitting,Reduce ID Brass Hose Adapter

#ad
Joywayus #ad - They are made of brass, stainless steel, galvanized steel, pressure, and other materials that resist corrosion, and wear. Adapter for connecting a hose to a hose threaded connection of a different diameter. This fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule not included.

This joyway series hose fitting is made of forged brass and connects and branches three hoses. Connections: Hose Barb x Hose Barb. It is made of forged brass for greater strength than cast brass. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Hose fittings have various types of connections, dry disconnect, including threaded, push-to-connect, barbed, and others including those based on internationally-accepted specifications.

Joywayus Hose Barb Reducer,1/4" to 3/8" Barb Fitting,Reduce ID Brass Hose Adapter #ad - Hose fittings are used in systems such as air compressors, aircraft controls, mining, and tire installation in industries including agriculture, road construction, firefighting, automatic manufacturing operations, and aviation. Temperatures range from -40 to 160 F. Hose fittings connect, change the direction of, control, and terminate the flow in piping and hose systems.

#ad



EDGE INDUSTRIAL 3/8" X 5/16" Hose ID Brass Barb Reducer SPLICER Fitting Fuel / AIR / Water / Oil / Gas / WOG Qty 1

#ad
EDGE INDUSTRIAL #ad - Please review our attached npt sizing chart to cross reference NPT thread size to linear inches 3/8" x 5/16" brass barb Splicer Reducer Fitting. Not deemed lead free. 150 psi maximum working pressure. 40° to 160° temperature rating. 40° to 160° temperature Rating. Not for potable water. Please note: npt thread size is NOT determined by its outside thread diameter in inches.

Backed by edGE Industrial full manufacturers warranty. Not deemed lead free. 3/8" x 5/16" brass barb Splicer Reducer Fitting. 150 psi maximum working pressure. Not for use with potable water.

#ad



Beduan Brass Hose Barb Reducer, 3/8" to 5/16" Barb Hose ID, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel

#ad
Beduan #ad - Contains no lead. Not deemed lead free. 150 psi maximum working pressure. Not for potable WATER. Not for potable water. Backed by edGE Industrial full manufacturers warranty. 40° to 160° temperature Rating. Material: brass. Temperatures range from -40 to 160 F. Type : barb hose mender/splicer Reducer. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

This beduan series hose fitting is made of forged brass and connects and branches two hoses. This fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule not included. It is made of forged brass for greater strength than cast brass. Hose fittings connect, change the direction of, control, and terminate the flow in piping and hose systems.

Beduan Brass Hose Barb Reducer, 3/8" to 5/16" Barb Hose ID, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel #ad - They are made of brass, and other materials that resist corrosion, galvanized steel, stainless steel, pressure, and wear. Hose fittings have various types of connections, push-to-connect, including threaded, dry disconnect, barbed, and others including those based on internationally-accepted specifications.

Hose fittings are used in systems such as patio, aircraft controlsAnd tire installation in industries including agriculture, automatic manufacturing operations, lawns, air compressors, mining, lawn garden hose connect, road construction, Irrigation, firefighting, and aviation. 150 psi maximum working pressure.

#ad



Joyway 3/8" to 1/2" Reducer ID Hose Barb Splicer, Hex Union Fitting Intersection/Split Brass Water/Fuel/Air

#ad
Joyway #ad - Type : barb hose mender/splicer Reducer. Hose fittings are used in systems such as air compressors, firefighting, aircraft controls, and tire installation in industries including agriculture, road construction, automatic manufacturing operations, mining, and aviation. Contains no lead. Backed by edGE Industrial full manufacturers warranty.

Hose fittings connect, change the direction of, control, and terminate the flow in piping and hose systems. Adapter for connecting a hose to a hose threaded connection of a different diameter. Material: brass. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. They are made of brass, and other materials that resist corrosion, stainless steel, pressure, galvanized steel, and wear.

Joyway 3/8" to 1/2" Reducer ID Hose Barb Splicer, Hex Union Fitting Intersection/Split Brass Water/Fuel/Air #ad - Adapter for connecting a hose to a hose threaded connection of a different diameter. Not for potable WATER. Not deemed lead free. This fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule not included. Temperatures range from -40 to 160 F. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

#ad



EDGE INDUSTRIAL 5/16" X 1/4" Hose ID Brass Barb Reducer SPLICER Fitting Fuel / AIR / Water / Oil / Gas / WOG Qty 1

#ad
EDGE INDUSTRIAL #ad - Not deemed lead free. Temperatures range from -40 to 160 F. Not for use with potable water. Type : barb hose mender/splicer Reducer. Not deemed lead free. 150 psi maximum working pressure. 5/16" x 1/4" brass barb Splicer Reducer Fitting. Contains no lead. Not for potable WATER. 150 psi maximum working pressure. Backed by edGE Industrial full manufacturers warranty.

Backed by edGE Industrial full manufacturers warranty. Temperatures range from -40 to 160 F. Connections: Hose Barb x Hose Barb. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Please review our attached npt sizing chart to cross reference NPT thread size to linear inches 3/8" x 5/16" brass barb Splicer Reducer Fitting.

EDGE INDUSTRIAL 5/16" X 1/4" Hose ID Brass Barb Reducer SPLICER Fitting Fuel / AIR / Water / Oil / Gas / WOG Qty 1 #ad - 150 psi maximum working pressure. 40° to 160° temperature Rating. 40° to 160° temperature rating. 150 psi maximum working pressure. Not deemed lead free.

#ad



Koehler Enterprises KE4BX 10 Piece Hose Clamp Box Micro Size 4

#ad
Koehler Enterprises KE4BX #ad - Type : barb hose mender/splicer Reducer. Suitable for a variety of applications for home, auto and industrial use. Adapter for connecting a hose to a hose threaded connection of a different diameter. The low profile housing and 1/4" hex head screw are both produced with plated carbon steel and are small enough to allow installation within hard to reach spaces with limited access.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Not for potable water. Temperatures range from -40 to 160 F. Contains no lead. Connections: 3/8" x 5/16". These clamps feature 5/16 inch bands constructed of 300 series stainless steel for maximum corrosion resistance to salt and most chemicals.

Koehler Enterprises KE4BX 10 Piece Hose Clamp Box Micro Size 4 #ad - Material: brass. Micro size 4, 56 to 1, clamping range from 1/4 inch to 5/8 inch 0, 59 cm. Ideal for installation in tight-fitting or hard to reach places. Backed by edGE Industrial full manufacturers warranty. Adapter for connecting a hose to a hose threaded connection of a different diameter. 40° to 160° temperature Rating.

#ad



Metalwork Brass Barb Reducing Splicer Mender Union, 6.5mm to 5mm Hose ID, 1/4" Barbed x 3/16" Barbed Fitting, Air Water Fuel Hose Reducer Joiner Pack of 2

#ad
Metalwork #ad - Barbed fitting for a tight seal on hoses. Connects to a hose on both ends. Not for potable water. Hose fittings have various types of connections, barbed, including threaded, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Adapter for connecting a hose to a hose threaded connection of a different diameter.

This union coupling is made of brass and connects two hoses with the different diameter in a straight run. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. You can track your package according to the tracking number, which logistic information can be inquired on this website: www.

Metalwork Brass Barb Reducing Splicer Mender Union, 6.5mm to 5mm Hose ID, 1/4" Barbed x 3/16" Barbed Fitting, Air Water Fuel Hose Reducer Joiner Pack of 2 #ad - 17track. Net. Connections: Hose Barb x Hose Barb. If you don't received your package after it shipped two weeks, or received wrong size, please contact us before you leave feedback, thank you! 3/8" x 5/16" brass barb Splicer Reducer Fitting. Connections: 3/8" x 5/16". Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Micro size 4, clamping range from 1/4 inch to 5/8 inch 0, 56 to 1, 59 cm. Ideal for installation in tight-fitting or hard to reach places.

#ad



Joyway 1/4 to 1/2 Reduce ID Hose Barb Splicer, Hex Union Brass Fitting Reducer Water/Fuel/Air

#ad
Joywayus #ad - Backed by edGE Industrial full manufacturers warranty. Typical application:temperature control circuits, lubricant, pneumatic circuits, vacuum and fluid systems test apparatus, coolant lines. Adapter for connecting a hose to a hose threaded connection of a different diameter. Temperatures range from -40 to 160 F.

Barbed fitting for a tight seal on hoses. Connections: 3/8" x 5/16". 300 series stainless steel band provides maximum corrosion resistance to salt and most chemicals. Connections: Hose Barb x Hose Barb. Micro size 4, clamping range from 1/4 inch to 5/8 inch 0, 56 to 1, 59 cm. Ideal for installation in tight-fitting or hard to reach places.

Joyway 1/4 to 1/2 Reduce ID Hose Barb Splicer, Hex Union Brass Fitting Reducer Water/Fuel/Air #ad - 40° to 160° temperature Rating. Reducing union coupling for connecting two hoses with the differrent diameter in a straight run. 3/8" x 5/16" brass barb Splicer Reducer Fitting. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Backed by edGE Industrial full manufacturers warranty.

Connects to a hose on both ends. This joywayus series hose fitting is made of forged brass and connects and branches tow hoses.

#ad



Anderson Metals 57001 Brass Hose Fitting, Adapter, 3/8" Barb x 1/4" NPT Male Pipe

#ad
Anderson Metals 57001-0604 #ad - Typical application:temperature control circuits, lubricant, pneumatic circuits, vacuum and fluid systems test apparatus, coolant lines. Adapter for connecting a hose to a male threaded connection of a different diameter. Reducing union coupling for connecting two hoses with the differrent diameter in a straight run.

Micro size 4, clamping range from 1/4 inch to 5/8 inch 0, 56 to 1, 59 cm. Ideal for installation in tight-fitting or hard to reach places. Connections: Hose Barb x Hose Barb. Not deemed lead free. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. 3/8" x 5/16" brass barb Splicer Reducer Fitting.

Anderson Metals 57001 Brass Hose Fitting, Adapter, 3/8" Barb x 1/4" NPT Male Pipe #ad - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Type : barb hose mender/splicer Reducer. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. And its territories. Material: brass. 150 psi maximum working pressure. Adapter for connecting a hose to a hose threaded connection of a different diameter.

#ad



1/4" Hose ID x 1/8" Hose ID Reducer Barb Mender/Splicer/Joiner/Union Fitting Brass Tubing Hose Adapter/Coupler 2pcs

#ad
Metalwork #ad - Typical application:temperature control circuits, pneumatic circuits, lubricant, vacuum and fluid systems test apparatus, coolant lines. Adapter for connecting a hose to a male threaded connection of a different diameter. Not deemed lead free. And its territories. 1/4" x 1/8" barb reducer Splicer Fitting. Adapter for connecting a hose to a hose threaded connection of a different diameter.

1/4" Hose ID x 1/8" Hose ID Reducer Barb Mender/Splicer/Joiner/Union Fitting Brass Tubing Hose Adapter/Coupler 2pcs #ad - Hose barb on one end and male NPT threads on the other. Connections: 3/8" x 5/16". Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Micro size 4, clamping range from 1/4 inch to 5/8 inch 0, 56 to 1, 59 cm. Ideal for installation in tight-fitting or hard to reach places.

Barbed fitting for a tight seal on hoses. Not for potable water. Not deemed lead free. Backed by edGE Industrial full manufacturers warranty. Connections: Hose Barb x Hose Barb. Adapter for connecting a hose to a hose connection of a different diameter. Temperatures range from -40 to 160 F.

#ad



NIGO Industrial Co. 3-Way Tee Brass Hose Fitting 3, 1/4" x 1/4" x 1/4" Barb

#ad
Nigo Industrial Co. #ad - Connections: 3/8" x 5/16". Suitable for a variety of applications for home, auto and industrial use. Not for potable WATER. 150 psi maximum working pressure. 150 psi maximum working pressure. Reducing union coupling for connecting two hoses with the differrent diameter in a straight run. 1/4" barbed fitting has three openings for connecting your 1/4" ID hoses.

Connections: Hose Barb x Hose Barb. Products features  * constructed from forged brass  * all nigo's products conform to specifications ASTM American Society for Testing and Materials B124 and B16 * NPT threads on all Nigo's products meet ASME B1. 201 * designed for use in air, manufactured, nature, mixed, water, oil, liquefied petroleum or propane and LP Gas-Air * 1/4” Barbed fitting has three openings for connecting your 1/4” ID hoses   * Temperatures range from -40 to 160 F * Max.

NIGO Industrial Co. 3-Way Tee Brass Hose Fitting 3, 1/4" x 1/4" x 1/4" Barb #ad - Temperatures range from -40 to 160 F. 3/8" x 5/16" brass barb Splicer Reducer Fitting. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. 150 psi maximum working pressure. Ltd manufactures a wide variety of valves and pipe fittings. Temperatures range from -40 to 160 F.

#ad