As an Amazon Associate I earn from qualifying purchases.
7mm, and the Hour Shaft Diameter is 5. 5mm. Please note: please measure the shaft of you clock mechanism you need before buying ! Important : this model is a 5mm ordinary shaft, otherwise the front nut cannot be tightened and the clock cannot run ! !Due to different measuring tools and measuring methods, which is suitable for clock panel thickness of not more than 4mm, the measured length may be slightly different from the actual one.
Cannot Use Rechargeable Batteries. Screw shaft Diameter 7. 6mm. For diy quartz wall clock replacement movement part, applicable framless 3D Wall clock. The total length of the shaft is 12mm, and the length of the yellow spiral is 5mm. Size about : 5. 6 x 5. 6 x 1. 5cm/2. 2 x 2.

90 mm 3. 5 inch; minute hand is approx. Center of hole hand size: hour hand is approx. Wide application: they are fit for cross-stitch, and specially suitable for DIY quartz wall clock replacement movement parts, three-dimensional embroidery, frame-less draw clock, craft clock, etc.

Silent:this wall clock movement belongs to the scanning type. Super easy to install:our diy wall Clock Mounting Kit makes it easy to turn a bare wall into a fantastic clock.



Warm notice: please double-check the dimensions of this clock mechanism replacement movement before purchasing; they are made of aluminum, and please do not apply excessive pressure to avoid bending them. Material&package: the clock hands are made of high-quality aluminum, which is lightweight and resistant to corrosion.
All of your requirements are met by a simple and elegant design. Wide application: diy quartz wall clock replacement movement parts, suitable for cross-stitch, craft clock, replacing, suitable for repairing, frameless draw clock, three-dimensional embroidery, or making a clock, and also suitable for various styles of the clock frame no battery.6pcs clock mechanisms & two size: short total shaft length 16 mm 063 in, suitable for 9 - 13 mm thickness clock panel.

No harm to the environment and health. Enjoy the diy - 3d clock hands has an open design with just minute and hour hands.
Our service: we believe you will love this 3d clock hands, If there is any problems, please feel free to contact us. Main function - applicable to cross-stitch, craft clock;suitable for quartz clock repairing, three-dimensional embroidery, replacing or making a clock£¬Large clock hands also can be used as a wall decoration.

Material: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending. Kindly reminder: there is only one minute hand and one hour hand; After putting battery in, you must spend 5 minutes to test the clock move or not; Powered by 1 x 1.

Gold-finished hands and pendulum offer watchmakers' accuracy and dependability. Suitable for making, repairing, and restoring all kinds of analog clocks, from simple wall clocks to cuckoos.

1. ULTNICE
#ad
ULTNICE Quartz Clock Mechanism Battery Operated DIY Wall Clock Movement Repair Parts
#adULTNICE #ad - Thank you for your understanding!!! . The error is less than +-1. 5 seconds/day, and the power consumption is less than 200 microamps. Diameter : the minute shaft diameter is 3. 6-3.7mm, and the Hour Shaft Diameter is 5. 5mm. Please note: please measure the shaft of you clock mechanism you need before buying ! Important : this model is a 5mm ordinary shaft, otherwise the front nut cannot be tightened and the clock cannot run ! !Due to different measuring tools and measuring methods, which is suitable for clock panel thickness of not more than 4mm, the measured length may be slightly different from the actual one.
More information #ad
Cannot Use Rechargeable Batteries. Screw shaft Diameter 7. 6mm. For diy quartz wall clock replacement movement part, applicable framless 3D Wall clock. The total length of the shaft is 12mm, and the length of the yellow spiral is 5mm. Size about : 5. 6 x 5. 6 x 1. 5cm/2. 2 x 2.
Brand | ULTNICE #ad |
Manufacturer | ULTNICE #ad |
Height | 0.63 Inches |
Length | 2.2 Inches |
Weight | 0.02 Pounds |
Width | 2.2 Inches |
Part Number | 21F2118PVNU |
Model | 21F2118PVNU |
More information #ad
2. Mudder
#ad
31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit Black
#adMudder #ad - Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs. Warm notice: when you install it, please keep the hour hand and minute hand parallel.90 mm 3. 5 inch; minute hand is approx. Center of hole hand size: hour hand is approx. Wide application: they are fit for cross-stitch, and specially suitable for DIY quartz wall clock replacement movement parts, three-dimensional embroidery, frame-less draw clock, craft clock, etc.
More information #ad
Movement size: shaft length is 31 mm 1-1/ 5 inch; thread length is 24. 6 mm 24/ 25 inch; jump second movement, suitable for 16 - 21 mm 5/ 8 - 4/ 5 inch thickness clock panel. 120 mm 4. 7 inch; Second caps is approx. 7 mm 028 inch; please check the size before buying.Brand | Mudder #ad |
Manufacturer | Mudder #ad |
Height | 2.17 Inches |
Length | 0.63 Inches |
Weight | 0.09 Pounds |
Width | 1.5 Inches |
Part Number | 43216-77972 |
More information #ad
3. Yooyoo
#ad
Home Art Decor AccessoriesBlack, Large Wall Clock Hands and Movements Set, 3D Clock Hands, DIY Wall Clock Hands Motor Kit, Metal Needles and Mounting Cup, Quartz Clock Mechanism Replacement Parts
#adYooyoo #ad - Enjoy the diy moment:you can design your clock and room according to your habits, sayings, add numbers, or more whatever you like! Share your design process with friends and family.Silent:this wall clock movement belongs to the scanning type. Super easy to install:our diy wall Clock Mounting Kit makes it easy to turn a bare wall into a fantastic clock.
More information #ad
Tips : please contact us if any problems, we will be responsible for our product and service. Diy wall clock kits: includes the tapered style hour 12. 4" and minute hands(15. 4"), clock movements, clock mechanism. Continuous Sweep Clock Movements operate virtually silently.Brand | Yooyoo #ad |
Manufacturer | YOOYOO #ad |
Height | 4.76 Inches |
Length | 0.83 Inches |
Weight | 0.55 Pounds |
Width | 0.01 Inches |
More information #ad
4. EXCEART
#ad
EXCEART 1 PC Lightweight Clock Movement Wall Clock Mechanism Wall Clock Accessories for DIY Home Decoration Time Wall Craft Replacement Repair
#adEXCEART #ad - Wide application: our lightweight Clock Movement is great for repairing, replacing or making a clock. Quality material: made of high quality material, it is durable and long lasting use. Great enjoyment: suitable for smooth wall and background.More information #ad
Great decoration for home, hotel, restaurant, etc. This is a modern simple fashion clock. Diy craft: can diy a simple clock as wonderful decoration, kitchen, then hang and stick it on the wall in bedroom, living room or office. Practical use: for diy quartz wall clock replacement movement part, applicable framless 3D Wall clock.Brand | EXCEART #ad |
Manufacturer | EXCEART #ad |
Weight | 0.05 Pounds |
Part Number | 2792H759PA10AF4RU4BX |
Model | 2792H759PA10AF4RU4BX |
More information #ad
5. Ologymart
#ad
Ologymart Clocks, 1PCs, Quartz Clock Movement Parts Replacement Mechanism Movements Battery Operated Motors Powered Motor Hands, Black Hands Quartz Clock Wall Movement DIY Mechanism Repair Tool
#adOlogymart #ad - Great for repairing, replacing or making a clock. Clock case size 2. 2 x 2. 2 x 06 inch. Minute hand length 4 inch. Thread length 022 inch. Second hand length 5 inch. Hour hand length 3 inch.More information #ad
Brand | Ologymart #ad |
Part Number | VXUQPZDDHHAOHY3O526D |
More information #ad
6. YOGINGO
#ad
Wall Clock Mechanisms Mattery Powered Replacement, 6Pcs Quartz Clock Mechanism Kit, Clock Movement Parts Motor Replacement DIY Repair Parts with 6 Set Hands No Battery
#adYOGINGO #ad - Silent clock mechanism: yogingo clock movement use ultra-silent Scanning Design, Sweep clock movement without any noise which can offer your sleep a silent environment. These two clock movements size can be used for almost any home wall clock, suit for 3 - 6 mm thickness clock panel.Warm notice: please double-check the dimensions of this clock mechanism replacement movement before purchasing; they are made of aluminum, and please do not apply excessive pressure to avoid bending them. Material&package: the clock hands are made of high-quality aluminum, which is lightweight and resistant to corrosion.
More information #ad
Long total sharft length 23 mm 09 in, thread length 15. 4 mm 06 in, thread length 8mm 0315 in, three of each size. Includes 6 clock movements in two sizes, 6 seconds hands and 6 seconds cap, 6 pairs of hours and minutes hands, easy to install, and many options in one set. All of your requirements are met by a simple and elegant design. Wide application: diy quartz wall clock replacement movement parts, suitable for cross-stitch, craft clock, replacing, suitable for repairing, frameless draw clock, three-dimensional embroidery, or making a clock, and also suitable for various styles of the clock frame no battery.6pcs clock mechanisms & two size: short total shaft length 16 mm 063 in, suitable for 9 - 13 mm thickness clock panel.
Brand | YOGINGO #ad |
Manufacturer | YOGINGO #ad |
Height | 1 Inches |
Length | 10 Inches |
Width | 2 Inches |
Model | CK 006 |
More information #ad
7. AILILIFE
#ad
DIY Large Clock Movement Mechanism with 12 Inch Long Spade Hand, 3D Wall Clocks Home Decor, Aililife 3D Clock Hands
#adAILILIFE #ad - Silence movement - silent sweeping, mute movement 3d clock hands will give you a quiet night. Unique design - 3d clock hands fit clock dial over 25" diameter, easy and simple design with mute scanning movement, Introducing from high-technology which maximum reducing power consumption and effectively extending the life of the movement.No harm to the environment and health. Enjoy the diy - 3d clock hands has an open design with just minute and hour hands.
More information #ad
You can design your clock and room according to your habits, or share your design process with friends and family. Our friendly customer service will be always with you whenever you need our technical support. Our service: we believe you will love this 3d clock hands, If there is any problems, please feel free to contact us. Main function - applicable to cross-stitch, craft clock;suitable for quartz clock repairing, three-dimensional embroidery, replacing or making a clock£¬Large clock hands also can be used as a wall decoration.
Brand | AILILIFE #ad |
Manufacturer | Aililife #ad |
Weight | 0.6 Pounds |
More information #ad
8. Hicarer
#ad
Hicarer DIY Large Clock Hands 3D Wall Clock for Kitchen Office and Home Art Decor Quartz Clock Movement Mechanism Accessories
#adHicarer #ad - Center of hole hand size: the hour hand is approx. 70 cm/ 30 inch. Home decoration: you can diy a simple clock as wonderful decoration, kitchen, then hang and stick it on the wall in bedroom, living room or office.Material: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending. Kindly reminder: there is only one minute hand and one hour hand; After putting battery in, you must spend 5 minutes to test the clock move or not; Powered by 1 x 1.
More information #ad
5 v aa battery not included. 203 mm/ 8. 0 inches long; the minute hand is about 305 mm/ 12 inches in length; Second cap: approx. Size: you can apply the clock movement kit to DIY a wall clock, and its mini size is approx. 7 mm/ 03 inch,please check the size before purchase.Brand | Hicarer #ad |
Manufacturer | Hicarer #ad |
Height | 0.79 Inches |
Length | 16.73 Inches |
Weight | 0.3 Pounds |
Width | 3.94 Inches |
Part Number | Hicarer-Clock Movement-01 |
More information #ad
9. Walnut Hollow
#ad
Walnut Hollow Pendulum Clock Movement for 3/4-inch Surfaces, Large
#adWalnut Hollow #ad - Shop walnut hollow's wood clock surfaces ideal for use with Walnut Hollow clock kits; design and build your own timepieces for home decor or gifts.Gold-finished hands and pendulum offer watchmakers' accuracy and dependability. Suitable for making, repairing, and restoring all kinds of analog clocks, from simple wall clocks to cuckoos.
More information #ad
One set of clock-making components designed for use with 3/4"-thick wood surfaces sold separately; includes minute hand, and second hand, hour hand, plus 9-5/8" pendulum. Comes with full assembly instructions; uses 1 AA battery not included; 15/16" shaft length; 9-5/8" pendulum length; 2-3/4" pendulum diameter.Brand | Walnut Hollow #ad |
Manufacturer | Walnut Hollow #ad |
Height | 11.81 Inches |
Length | 2.5 Inches |
Weight | 10.4 ounces |
Width | 5.81 Inches |
Part Number | TQ800P |
Model | TQ800P |
More information #ad
10. Mudder
#ad
Mudder Silence Quartz Clock Movement, 4/5 Inch Total Shaft Length Black, 11/25 Inch Maximum Dial Thickness
#adMudder #ad - Mute scanning movement, suitable for 8 - 11 mm 3/ 10 - 11/ 25 inches thickness clock panel. Suitable for repairing, replacing or making a clock. Applicable to cross-stitch, frameless draw clock, craft clock, three-dimensional embroidery, etc.More information #ad
Diy quartz wall clock replacement movement parts; Note: black on the front and silver on the back. Total shaft length is 20 mm 4/ 5 inches, thread length 14 mm 3/ 5 inches.Brand | Mudder #ad |
Manufacturer | Mudder #ad |
Height | 0.63 Inches |
Length | 2.17 Inches |
Weight | 0.09 Pounds |
Width | 2.17 Inches |
Part Number | HK00E1554 |
Model | 8541847128 |
More information #ad