Top 9 Clamp Edge and Saw Guide – Circular Saw Blades

As an Amazon Associate I earn from qualifying purchases.

1. Kreg

#ad

Kreg KMA2685 Rip-Cut Circular Saw Guide

#ad
Kreg #ad - Eliminate need for marking, measuring, and layout lines. Use the oversize edge guide for precise control throughout the cut. Make rip cuts and crosscuts up to 24" Wide. Cut multiple pieces to the same size With just one setup. Take your saw to the material instead of having to take your material to the saw.
BrandKreg #ad
ManufacturerKreg #ad
Height2.5 Inches
Length30.88 Inches
Weight2.45 Pounds
Width8.75 Inches
Part NumberKMA2685
ModelKMA2685
Warranty90 day warranty

2. Bessey

#ad

Red/Silver, Bessey GTR16S6H All Steel Ratcheting Table Clamp with 6 5/16" Capacity x 2 5/16" Throat Depth & 540 lb Clamping Force

#ad
Bessey #ad - Steel pressure pad pivots to self align with clamped material surface. High force clamping for safety. Clamping force, cold drawn German steel rails. 540 lb. Fast action ratchet handle.
BrandBessey #ad
ManufacturerBESB9 #ad
Height1.25 Inches
Length11.25 Inches
Weight1 Pounds
Width4 Inches
Part NumberGTR16S6H
ModelGTR16S6H
Warranty1 year against manufactuirng defects

3. Seal Rubber

#ad

Fits Edge 1/4 Inch, Length 10 Feet 3.05 Meter, Edge Trim Black Large

#ad
Seal Rubber #ad - Contains internal metal clips to grip permanent around the install place. Very flexible. High quality materials. Easy install. Not need to adhesive. High quality manufacture.
BrandSeal Rubber #ad
ManufacturerSeal Rubber #ad
Weight0.77 Pounds
Part NumberD012-10F
ModelHM-00920

4. Qooltek

#ad

Qooltek Multipurpose Laser Level Laser Line 8 feet Measure Tape Ruler Adjusted Standard and Metric Rulers for hanging pictures

#ad
Qooltek #ad - Note: fades in sunlight or outdoor use. Backup battery - ships with 3 x AG 16 button-cells battery, just to make sure you keep going with maximum convenience. 8-foot measuring tape - comes loaded with an 8-foot measure that includes imperial and metric linear measures, with graduations down to 1/32" and 4mm.

Works for indoor - designed for any situation where a straight line or accurate measurements are needed, such as measuring locations on a wall, level for hanging pictures. Regardless of the situation, space between hangers, level the nails, it's completely plug & play.3-pronged approach - combines a fine-tuned tape measure, that is given as "+/-2mm at 10m and 25m";If the laser is the Vertical Level or the Horizontal Level, a triple-positioned leveling bubble and a NEW laser level to provide maximum results.

Note: laser ranging Error, you shouldn't adjust the Beam. I ideal for the job that requires a straight line Or Accurate Measurement. Ideal for father's Day Gift and building some Thanksgiving decorations.
BrandQooltek #ad
ManufacturerQooltek #ad
Height2.5 Inches
Length7.28 Inches
Weight0.5 Pounds
Width1.1 Inches
Part NumberBFBA-0007
ModelBFBA-0007

5. ENOCH

#ad

3 Modes, 30 Brightness Dimmable Clamp Desk Light with Memory Function/USB Adapter, ENOCH 14W Eye-Caring Metal Swing Arm Desk Lamp with Clamp, LED Desk Lamp, Architect Table Desk Lamps for Home Office

#ad
ENOCH #ad - The lampshade of clamp light is made of quality aluminum material, which are warm light, warm white light, which has better heat dissipation and a service life of up to 50, and white light. Risk-free purchase: providing quality products and services is our development philosophy.

The light of the clamp lamp is very uniform and soft, no glare, effectively prevent the harm of blue light, no shadow, and care for the child's delicate retina. The base and light board of the LED lamp can be rotated 360° to provide multi-directional lighting. Eye-caring and memory function: enoch clamp desk lamp are professionally designed and made of 80 high-quality lamp beads in an exquisite layout. Led office lamp adopts a three-axis design, make metal swing arm can 180° adjusted and extended to 405 inch of height.

The length of the power cord is 78. 8 inches, mobile power supplies. Note: please make sure to use a 5V/2A adapter to power the desk lamp to avoid damage. Usb power supply and widely uses: our led desk lamp is come with a dedicated usb charging cable and a 5v/2a adapter us fcc certification, artistic lighting, working, sewing, handicrafts, ladies nail, knitting, which is safer and more reliable than other adapters. This foldable clamp lamp is easy to carry and save space.
BrandENOCH #ad
ManufacturerENOCH #ad
Part NumberT-LUCOOK

6. WORX

#ad

Worx MAKERX WX991L 3pc Crafting Tool Combo Kit, Rotary Tool + Angle Grinder + Wood & Metal Crafter

#ad
WORX #ad - Compact brushless motors both the rotary tool & angle grinder are powered by brushless motors which run longer on a single battery charge and dole out more power. 58 accessories included all the bits, cutting wheels, and interchangeable tips you need to get started, plus a Storage Bag and Accessories Storage Case.

Micro-ergonomic design all makerx tools are specially designed to be compact, so they’re more comfortable to hold for long stretches, and are easier to maneuver. Quick heat up nearly instant 30-second target heat. The wood & metal crafter burns as hot as a full-size iron, but in a size that’s much easier to use for detail work. Do it all with the same battery worx power share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products.

The hub is the only portable 20V power system for hobby and crafting tools on the market. Engrave, sand & burn 3 tools to add an extra level of detail, personalization, GRIND, and professionalism to your work. Hub + flex cord every tool on the makerx platform is powered by the hub and its rechargeable 20V Power Share battery—both of which are included in this kit.
BrandWORX #ad
ManufacturerWorx #ad
Part NumberWX991L
ModelWX991L

7. Craftsman

#ad

CRAFTSMAN V20 Cordless Lopper CMCCSL621D1

#ad
Craftsman #ad - Compact design for pruning trees & shrubs. Scissor type action fast cutting in one easy motion. Patented clamping jaws easily and safely grab and cut tree limbs. 3 year limited warranty, refer to "Warranty & Support" section below for full details. Includes battery and charger. Replacement parts available: chain CMZCSC6, bar CMZCSB6. Cuts up to 4inches Diameter ideal for storm clean up.
BrandCraftsman #ad
ManufacturerCRAFTSMAN #ad
Height11.06 Inches
Length24.38 Inches
Weight9.5 Pounds
Width7.25 Inches
Part NumberCMCCSL621D1
ModelCMCCSL621D1

8. Saker

#ad

Must Have Tool for DIY Handyman, Construction, Saker Contour Gauge 5 Inch Lock Profile Tool- Adjustable Lock-Precisely Copy Irregular Shape Duplicator -Irregular Welding Woodworking Tracing

#ad
Saker #ad - Precise shape duplication:saker contour gauge designed for winding pipes, laminate, circular frames, checking dimensions, moulding, ducts and many objects, Ideal for fitting tiles, etc. Useful tool for operations on car bodies, carpet, carpentry and for all kinds of modelling.

Good material and portable:The contour gauge is made of high quality ABS plastic, high strength, rustproof and durable. After using the contour ruler for a period of time, you can easily adjust the tightness;Once object has been contoured, lock contour gauge teeth in place for perfect traces every time. Extensive application:contour gauge is used to locate profiles or edges and accurately transfer to the material to be cut. For any kind of work needs the contour duplication.

Esay to use:our contour gauge measures 5 inch&10inch, can be used to measure the shape of irregular objects,instant template for marking precise tile cuts. You just press the contour gauge on one of the shapes. Trim outline and cut into shape. In woodworking, auto metal sheet, auto body, stainless steel or any job of contour duplication. Adjustable and locking feature:saker contour guage can adjust the tightness according to your needs.
BrandSaker #ad
ManufacturerSaker #ad
Part Number1

9. BLACK+DECKER

#ad

Project Center and Vise WM425-A, BLACK+DECKER Portable Workbench

#ad
BLACK+DECKER #ad - Easy setup - folds open and closed in seconds for easy setup and storage. More ways to work - Large working surface with extra block easily converts to vise. Rugged stability - holds up to 550 lbs with heavy-gauge steel frame and laminated bamboo stalk worktop. Versatile strength - Adjustable jaws, vertical clamping, and four adjustable swivel pegs for irregularly-shaped objects. Iconic workmate project center - Classic portable folding work table and vise for carpentry, DIY projects, woodworking, automotive work and more.
BrandBLACK+DECKER #ad
ManufacturerBlack & Decker #ad
Height30.3 Inches
Length31.2 Inches
Width28.86 Inches
Part NumberWM425-A
ModelWM425-A
Warranty2 year limited warranty