As an Amazon Associate I earn from qualifying purchases.
1. ULTNICE #ad
ULTNICE Quartz Clock Mechanism Battery Operated DIY Wall Clock Movement Repair Parts #adULTNICE #ad
- The error is less than +-1. 5 seconds/day, and the power consumption is less than 200 microamps. Size about : 5. 6 x 5. 6 x 1. 5cm/2. 2 x 2. 2 x 06inch. Cannot Use Rechargeable Batteries. Thank you for your understanding!!! The total length of the shaft is 12mm, and the length of the yellow spiral is 5mm.
Diameter : the minute shaft diameter is 3. 6-3. 7mm, and the Hour Shaft Diameter is 5. 5mm. Screw shaft Diameter 7.
6mm. Important : this model is a 5mm ordinary shaft, which is suitable for clock panel thickness of not more than 4mm, otherwise the front nut cannot be tightened and the clock cannot run ! !Due to different measuring tools and measuring methods, the measured length may be slightly different from the actual one.
Please note: please measure the shaft of you clock mechanism you need before buying ! Powered by 1 aa batterynot included, carbon batteries, You can use No. 5 aa batteries, alkaline batteries. For diy quartz wall clock replacement movement part, applicable framless 3D Wall clock.
2. Takane #ad
Choose your size, Takane Complete Mini Quartz Clock Movement, Clock Repair Kit #adTakane #ad
- Overall shaft Length: 1". Maximum minute hand length from hole to tip, 6 inches Order a high torque movement if you need longer then that. Includes all mounting hardware and metal wall hangar.
Threaded shaft Length 11/16". Hour & minute hand available UPON REQUEST ONLY. Please see below for full product description including how to receive hands. Shaft diameter: 5/16".
3. Mudder #ad
Mudder 31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit Black #adMudder #ad
- Wide application: they are fit for cross-stitch, and specially suitable for DIY quartz wall clock replacement movement parts, three-dimensional embroidery, craft clock, frame-less draw clock, etc.
Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs. Movement size: shaft length is 31 mm 1-1/ 5 inch; thread length is 24.
6 mm 24/ 25 inch; jump second movement, suitable for 16 - 21 mm 5/ 8 - 4/ 5 inch thickness clock panel. 120 mm 4. 7 inch; Second caps is approx. 90 mm 3. 5 inch; minute hand is approx. Warm notice: when you install it, please keep the hour hand and minute hand parallel. 7 mm 028 inch; please check the size before buying. Center of hole hand size: hour hand is approx.
4. Hicarer #ad
Quartz Movement Gold Trim, Gold Trim, Hicarer 2.8 Inch/ 70 mm Quartz Clock Insert, Arabic Numeral #adHicarer #ad
- Overall diameter: the front face/ bezel diameter of this insert is approx. Rubber band gasket: rubber band gasket securely hold the insert clock in place and allow for slight irregularity in the hole.
Suitable mounting diameter: this quartz movement fit round hole diameter of 2. 4 inch/ 61 mm, suitable mounting depth is 07 inch/ 17 mm. Needed power: just need 1 of 1. 5 v aaa battery not included can run a long time.
Appearance and surface: black arabic numerals on white face, clear glass lens, clear glass lens, plastic case with gold colored plastic bezel trimSA0849: Appearance and surface: black Arabic numerals on white face, plastic case with silver colored plastic bezel trim.2. 8 inch/ 70 mm; Please check the size before purchasing.
|Part Number||Hicarer-Clock Insert-01|
5. Mudder #ad
9/10 Inch Total Shaft Length Red, 1/2 Inch Maximum Dial Thickness, Mudder Long Spindle Quartz Clock Mechanism #adMudder #ad
- Simple style clock movement: it can match to diverse colors, shapes clock panel, patterns, it will not stand out, good movement will work well. Wide application: you are enable to use it to repair, craft clock, replace or make a clock; Applicable to cross-stitch, frameless draw clock, three-dimensional embroidery, etc.
Long spindle quartz clock replacement movement parts: the clock hand is rectangle shape, red color allow you to get the time even if you stand far away.
Note: this clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel. Jump second movement, suitable for 9 - 13 mm 9/ 25 - 1/ 2 inches thickness clock panel; Total shaft length: 23 mm 9/ 10 inches, thread length: 15. 4 mm 3/ 5 inches.
|Part Number||Mudder-Quartz Clock-01|
6. Bonlting #ad
Bonlting Classic Clock Craft Quartz Movement 2-1/2 65mm Round Clocks Head Insert Roman Number #adBonlting #ad
- 1. Whole diameter: 65mm. 5. Applicable: can be used as iron clock accessories. 3. Whole thickness: 25mm. 4. Back cover Thickness: 15mm. 2. Back cover Diameter: 55mm.
7. Walnut Hollow #ad
Walnut Hollow Pendulum Clock Movement for 3/4-inch Surfaces, Large #adWalnut Hollow #ad
- Includes gold colored hands and pendulum. Comes with full assembly instructions. Quartz clock movement needs AA battery which is not included. The ideal replacement parts for your treasured clock. Design and make your own pendulum clock.
|Brand||Walnut Hollow #ad|
|Manufacturer||Walnut Hollow #ad|
8. Outus #ad
2 Pieces Quartz Clock Movement Mechanisms Non Ticking Clock Mechanism with 8 Clock Hands Sets of DIY Movement Kits Replacement 13 mm #adOutus #ad
- Clock design: the design of the clock hands are simple and stylish which have a various styles; The long-axis clock mechanism provides accuracy and reliability, and there is no ticking sound provides you with a quiet environment. 13 mm/ 05 inch, and clock hands fit clock face 25 - 35 cm in diameter, when you install this clock movement kit, and the thread length is approx.
Widely applicable: these clock repair replacement parts are suitable for cross-stitch, frame-less wall clocks, craft clocks, 3 dimensional embroidery, especially for DIY quartz wall clock to replace for using.
Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits; There are various styles to choose which is very suitable for different styles of clock frames.
Quality material: the movement is made of abs material, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant, sturdy for a long time to use, providing you with nice use and decorative effect.6 mm/ 024 inch; the clock movement mechanism are suitable for 1 - 3 mm/ 004 - 012 inch thickness of clock panel, please check the sizes. Size: the total shaft length is approx.
9. TIKROUND #ad
59/64 Inch Total Shaft Length., Youngtown 12888 Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement,1/ 2 Inch Maximum Dial Thickness #adTIKROUND #ad
- Parameter: "i" shaft, drive long clock hands 10 mm to 450 mm; Total shaft length is 23. 5mm59/64 inch, thread length is 16mm5/8 inch. Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
Instructions - Included along with the movements. High torque "i" shaft clock movement:suitable for suitable for 9-13 mm 23/64 - 1/2 inches thickness clock panel.
Young town manufactures the 12888 series in various models, makesure the existing shaft and threads before ordering and you will get the right replacement. Long spindle quartz clock replacement movement parts with metal hook, Good for repairing, replacing or making a clock.